SHELL

BSEN10025S275J

HEADS

BSEN10025S275J

MANWAY NECK

BSEN10025S275J

MANWAY FLANGES

BSEN10025S275J

MANWAY FLANGE RATING

BS4504PN6

NOZZLE NECKS

ASTM AP15L

NOZZLE FLANGES

BSEN 10025S275J

FLANGE RATINGS

BS4504 PN16

BOLTING

BS4882 B7/2H

JOINTING

EDPM

LEGS

BSEN10025S275J

Hydraulic Testing

Hydraulically Tested to code on completion of fabrication

Corrosive Allowance

1 mm Nominal

Pressure

Cold Spun Torispherical

Pressure

Design 5 bar, Test 7.5 bar

Manways

Top & bottom 600mm NB manways complete with plate flanges, bolts, gaskets lifting handles and davit arm

Header & Laterals Internal Systems

Stainless Steel Header and Drop Pipes with Drilled ABS Laterals for use with Graded Gravel Underbed

Fittings

Two lifting lugs, One name plate

Internal Surfaces

Blast cleaned to SA21/2 and  apply 500  micron  D.F..T of DWI approved solvent free epoxy tank lining inclusive of spark test.

External Surfaces

Blast clean to SA21/2 and apply one coat of zinc phosphate epoxy primer to a D.F.T. of 100 micron.  One coat of epoxy MIO to a DFT of 125 micron, and on coat of Urethane Acrylic Finish to D.F.T. of 50 micron.